多轴向织物层合板层间剪切强度有限元分析与实验研究

用VIMP工艺制备了UD、0/45/-45、0/45/90/-45三种多轴向织物增强,四种厚度的GFRP层合板试样,采用短梁剪切实验考察了层间剪切强度和破坏模式。建立了GFRP层合板短梁剪切试样有限元模型,计算了内部层间剪应力分布。结合计算和实验结果分析表明层合板存在由宽度方向层间剪应力变化导致的自由边缘效应,含偏轴铺层的层合板更容易发生边缘开裂破坏。厚度相同时0/45/-45多轴向织物增强层合板的层间剪切强度最高。短梁剪切强度测试存在尺寸效应,随着厚度的增加,强度下降,样品波动系数增大。     

星载铷钟的故障模式及影响分析

星载铷钟在许多空间系统中起着重要作用,要求其具有高的可靠性。阐述了故障模式及影响分析在星载铷钟可靠性设计中的重要作用,介绍了星载铷钟的基本原理和结构简图,依据星载铷钟的功能将其划分为6个子系统,在此基础上进行了故障模式及影响分析,并给出了物理泵体子系统的部分FMEA结果。     

履带车辆转向过程仿真与试验研究

分析了简化条件下和考虑滑转滑移条件下履带车辆在坚实地面上的转向过程,对比计算了2种条件下转向时的牵引力、制动力、转向阻力矩和转向半径,并通过实车试验进行检验.结果表明,滑动模型揭示了履带车辆转向机理,与试验结果较为吻合.     

高层民用建筑消防登高作业区域设计

现行的国家工程建设消防技术标准,在实践过程中暴露出一些问题。结合工作实践经验,对高层民用建筑消防登高面、作业场地等消防登高作业区域设计中存在的问题进行了探讨,并提出了相应的解决方案。     

机动作战地空导弹载波相位差分定位模型研究

地空导弹部队在防空作战中,导弹火力单元要按上级的命令适时机动,需要对所在位置进行精确定位并及时上报上级单位,以便尽快组成新的雷达网继续参加战斗。根据GPS测距和差分GPS定位原理,利用载波相位差分设备把采集的载波相位发送给用户站进行求差解算坐标,得到机动作战导弹火力单元的位置坐标。根据载波相位差分定位GPS载波相位差分接收机技术成熟,成本不高,适合机动作战导弹部队应用。通过编制相应的模型软件,以及加入通信接口,便可用于导弹火力单元雷达站址的快速定位。     

集成电路方波脉冲注入损伤效应实验研究

为了得到各损伤参数随脉宽的变化规律,寻找建立评价复杂EMP波形对集成电路损伤模型的依据,对2种典型的集成电路器件进行了方波脉冲注入损伤实验。结果表明:RAM6264损伤电压、电流及功率均随脉宽增大而减小,损伤能量处于某一小范围之内,可能属于能量损伤型器件;BG305损伤电压、功率随脉宽增大而减小,损伤能量随脉宽增大而增大,损伤电流处于某一个小范围之内,可能属于电流损伤型器件。     

Optimization and mediated bartering models for ground delay programs

The Federal Aviation Administration (FAA) and the airline community within the United States have adopted a new paradigm for air traffic flow management, called Collaborative Decision Making (CDM). A principal goal of CDM is shared decision‐making responsibility between the FAA and airlines, so as to increase airline control over decisions that involve economic tradeoffs. So far, CDM has primarily led to enhancements in the implementation of Ground Delay Programs, by changing procedures for allocating slots to airlines and exchanging slots between airlines. In this paper, we discuss how these procedures may be formalized through appropriately defined optimization models. In addition, we describe how inter‐airline slot exchanges may be viewed as a bartering process, in which each “round” of bartering requires the solution of an optimization problem. We compare the resulting optimization problem with the current procedure for exchanging slots and discuss possibilities for increased decision‐making capabilities by the airlines. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

The economic effects of international trade in armaments in the major western industrialized and developing countries†

We have used the Michigan Model of World Production and Trade to assess the impact of exports and imports of armaments (based on 1980 data) on sectoral trade and employment and other economic variables in the major Western trading countries. If the United States were to place a unilateral embargo on its arms exports and imports, we calculate that it would experience a comparatively small amount of employment displacement in the aggregate and that most of this displacement would occur in the transport equipment and electric machinery sectors. If all the major Western countries were to place a multilateral embargo on their arms trade, the sectoral effects on the United States would be similarly small. But the sectoral effects in several other industrialized and developing countries measured as a percentage of sectoral employment, would be larger, indicating potential short‐run adjustment problems in labor markets in some cases.     

地面无人作战平台应用与发展

回顾了地面无人作战平台的发展历史,详细分析了主从遥控式和自主式地面无人作战平台的技术应用和常见任务载荷,并对美军研制的三类典型的地面无人作战平台进行了介绍.     

论物理化学教学内容及教学方法的改革

根据学科特点与教学实践 ,主张大胆删节与前设课程重复的内容 ,引进趋近科学前沿的新知识以优化教学内容 ,并强调引入新知识应符合科学发展规律 ;利用现代化教学手段自制小课件及开展课堂讨论 ,能够有效地提高教学效果